Double-Sided Frosted Acrylic Sheet

Double-Sided Frosted Acrylic Sheet

This double-sided frosted acrylic sheet is manufactured from 100% virgin MMA/PMMA resin supplied by Mitsubishi, using a cast production process. Both surfaces feature a uniform matte texture, providing consistent light diffusion and a non-reflective finish on both sides. The sheet has a density of 1.2 g/cm³, thickness ranging from 2.5 mm to 25 mm, and standard dimensions up to 2000 mm × 3000 mm. Custom sizes are available upon request.

The frosted finish on both surfaces reduces glare and fingerprint visibility while diffusing transmitted light evenly. The material is suitable for applications requiring privacy, light control, or a modern aesthetic. The product carries ISO, REACH, RoHS, and CNAS certifications, meeting international compliance standards for material safety and environmental requirements.

Performance at a Glance

These metrics reflect the material's weight characteristics, thickness availability, and dimensional options for project planning.

Core Advantages

• Dual frosted finish – Both surfaces feature a consistent matte texture, providing uniform light diffusion and privacy from either side.
• Fingerprint resistance – The frosted surface reduces the visibility of fingerprints and smudges compared to glossy sheets.
• Light diffusion – The matte surfaces scatter transmitted light evenly, reducing glare and creating uniform illumination for backlit applications.
• Privacy enhancement – The frosted finish obscures direct visibility while allowing light transmission, suitable for partitioning and screening.
• Fabrication flexibility – Can be cut, drilled, and thermoformed using standard acrylic processing equipment.
• Customization – Dimensions up to 2000 mm × 3000 mm, thicknesses from 2.5 mm to 25 mm, and colors matched to Pantone or RAL standards, including fluorescent, metallic, and pearl specialty colors.
• Material integrity – Made from Mitsubishi-brand virgin resin, with certifications including ISO, REACH, RoHS, and CNAS.

Material Properties

The sheet exhibits consistent surface texture across both sides. The frosted finish is uniform across the entire surface area. Packaging consists of PE film, kraft paper, and pallets to protect during transit and storage.

Available Dimensions

Custom dimensions outside the standard range can be produced upon request. Thickness availability may vary based on size and color specifications.

Application Fields

Frequently Asked Questions

Handling and Fabrication Guidance

For cutting, use fine-toothed blades or laser cutting equipment with appropriate power settings. Drilling should be performed with sharp bits at moderate speed, with cooling fluid to prevent melting or cracking. Thermoforming is effective at temperatures between 140°C and 160°C; preheat evenly and allow gradual cooling to maintain dimensional stability. Clean the surface with a soft cloth, mild soap, and water; avoid solvents containing alcohol, acetone, or abrasives that may damage the finish.

Storage Recommendations

Store sheets in a dry, flat position, protected from direct sunlight and heavy loads. Remove protective film only after final installation to prevent scratches during handling. For long-term storage, maintain temperatures between 10°C and 30°C with relative humidity below 60%.

Quality Assurance

Each production batch undergoes dimensional verification, surface finish consistency testing, and optical property checks. The manufacturing process follows ISO-compliant procedures, and materials are traceable to certified resin suppliers. A dedicated B2B support team coordinates order specifications and delivery schedules to meet project timelines.